Sig P365 Slide Release Stuck - I decided to install a wilson combat grip module on my p365. After reassembly my slide is locked back and i can not move the slide release. The release will not move down. Can’t get the slide to disengage. Any help or guidance is appreciated. Whether it’s a slide that won’t lock properly or trouble getting back into battery, the sig p365 can sometimes test your patience. But don’t worry, we’re here to solve these. With an empty magazine in place and the slide locked back, i cannot release the slide. I have to drop the magazine to get the slide to close. Check the recoil guide rod. If it's binding or stuck at the muzzle end it will prevent the slide from moving back. With the takedown in the open position the recoil spring will be. The sig p365 holster. Lock the slide to the rear. Pull down the take down lever and hold it, while you bring the slide forward with your other hand. If it's binding or stuck at the muzzle end it will prevent the slide from moving back. With the takedown in the open position the recoil spring will be. The sig p365 holster. Lock the slide to the rear. Pull down the take down lever and hold it, while you bring the slide forward with your other hand. Hold the lever takedown forward and grab the slide. You can press down on the slide release lever and with your other hand pull back on the slide and it will unlock and release. When i am doing snap cap (with my practice laser. Normally, the barrel and slide have a little movement together, rearward before the barrel cams downward and the barrel and slide disengage. Then shell extraction starts. When the slide is locked back on an empty mag, the magazine spring is pushing up on the slide release mechanism, overpowering the small spring in the slide release lever. I go over the mechanics. The linked video by sig mechanics explains how to release the slide of a p365 if it becomes stuck on the fcu due to a parts failure.
I decided to install a wilson combat grip module on my p365. After reassembly my slide is locked back and i can not move the slide release. The release will not move down. Can’t get the slide to disengage. Any help or guidance is appreciated. Whether it’s a slide that won’t lock properly or trouble getting back into battery, the sig p365 can sometimes test your patience. But don’t worry, we’re here to solve these. With an empty magazine in place and the slide locked back, i cannot release the slide. I have to drop the magazine to get the slide to close. Check the recoil guide rod. If it's binding or stuck at the muzzle end it will prevent the slide from moving back. With the takedown in the open position the recoil spring will be. The sig p365 holster. Lock the slide to the rear. Pull down the take down lever and hold it, while you bring the slide forward with your other hand.